DFX-8Z半自动定向仪

时间:2018-11-03 13:51   tags: 半自动X射线晶体定向仪  

DFX-8Z型半自动X射线晶体定向仪
DFX-8Z Model Semi-automatic Crystal Orientation Instrument
 
用途:
DFX-8Z型半自动X射线晶体定向仪,它是利用X射线衍射原理,设计制造的光,机,电三位一体精密仪器,能快速地测定天然和人造晶体的晶面,可与各种切割、研磨等加工设备配套使用。
主要特点:
1、采用PLC控制技术,自动化程度高、故障率极低、抗干扰能力强、系统稳定性好。
2、全中文人机界面,TFT触摸屏,界面直观、操作简单。
3、自动测量,只需轻触触摸屏或踩脚踏开关。
4、自动标晶校对准确方便、自动扫描10次,取平均值。
5、满足客户不同需求,设置单点、两点、四点测量模式。
6、具有测量数据打印功能,USB数据输出接口,可转换成EXCEL格式通过电脑存储管理。
7、模块化电路设计,便于保养、维护、维修。
8、自动光闸控制,只在必要时开启,最大限度保护操作者。
9、可根据被测样品不同,定制各种样品台和夹具(针对贵司蓝宝石需要测量C偏M45°晶向特制样品台),保证测量精度和使用的方便性。
10、可进行晶片或晶棒的角度自动测量,应用于各加工环节的角度检验,提高产品合格率。
11、可以对2-8英寸晶圆片自动旋转360°,并进行四方位自动定向。
技术指标:
           输入电源:单相交流220V、50HZ、0.5KW
           X射线管:铜靶阳极接地,强迫风冷;
           X管电压:-30KVP,全压合闸;
           X管电流:0~5mA,连续可调;
           功    率:总功率不大于0.5KW;
           保    护:自动光闸、高压连锁、温度保护;                                                                              
           静态检测精度:≤±3″
(用标准石英片SIO2、1011面)(θ:13°20′)(2θ:26°40′)
           样品台转角度:θ,0~+50°;                             
           计数器转角度:2θ,0°~+100°;                                     
           角度最小读值:1″;                                
      数 字 显 示:度、分、秒、。
角 度 调 整:数字显示可予置任何角度值。
      计 数 管:GJ5101盖革计数管工作电压0~1100V .       
         

 



 

 
 
DFX-8Z Type Semi-automatic Crystal Orientation Instrument
 
 
Functions:
DFX-Z series X-ray orientation instrument applies with X-ray diffraction principle, combines designing light, mechanical, electricity into one precision unit which can measures surface of nature & man-made crystal fast, if matches with cutter it can also used for crystal’s orientation cutting.
Main Features:
1、With PLC control technology, high automatic level, low failure rate, high anti-jamming ability, good stability.
2、Complete Chinese person-unit interface, TFT touching screen, magic view, simple operation.
3、Automatic measurement, only need to touch screen or step on pedal switch.
4、Automatic correction, precised and convenient, automatically scan for 10times, then get average value.
5、Satisfied with customer different requirement, set single point, two point, four points measurement mode.
6、Can print data, has USB date output port, can exchange into EXCEL form and save in computer.
7、Module type circuit designation, convenient for maintenance, repair.
8、Automatic optical shutter controlling, only turn on when necessary, maximum protect operator.
9、Can make different type table and clamp device according to inspected sample, make sure measurement precision.
10、Can do crystal plate or crystal ingot angle automatic measurement, apply into all process step angle inspection, improve product quality.
Technical Targets :
Input Power Single phase AC220V、50HZ、0.5KW
X-ray Tube copper target with anode grounding, force air cooling
Tube Voltage -30KVP, switch closed under full voltage
Tube Current 0~5mA,continuous adjustable
Frequency not over 0.5KW
Protection automatic optical shutter, high voltage interlock, temperature protection
Statistic inspection precision ≤±10″
Sample table angle θ,0~+50°
Timer angle 2θ,0°~+100°
Angle minimum value 1″
Digital displaying degree, minute, second
Angle adjustment digit display, can preset all angle value
Time tube GJ5101Geiger tube, voltage of 0~1100V
Strength display µA meter display strength value of inspected